Launch CReader V

CReaderV is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician. The feature of upgrading online ensures it can test new model cars and/or functions in the future.

Product description

Outline of CReaderV

1. Cable with OBD II CONNECTOR--Connects the CReaderV to the vehicle's Data Link Connector(DLC).
2. LCD DISPLAY--Indddicates test results.
3. EXIT BUTTON--Returns to previous menu.
4. UP/DOWN BUTTONs--Move cursor up or down for selection;or turn page up or down when more one page displayed
5. ENTER BUTTON--Confirms a selection(or action)from a menu list
6. USB PORT--Connects to computer to update the CReaderV online.

Specifications

1. Display:Backlit,160*160 pixels
2. Operating Temperature:0 to 60C(32 to 140 F)
3. Storage Temperature:-20 to 70C(-4 to 158 F)
4. Power:8 to 18 Volts Provided via DLC
5. Unit Dimensions:126mm*88mm*22mm(Length*Width*Thickness)
6. Test Cable Length:0.9m

Accessories Included

1. User's Manual--Instructions on tool operations
2. USB cable--Connect to a computer for upgrading online

Power supply

The power of the CReaderV is provided via the vehicle Data Link Connector (DLC).Follow the steps below to power it up:

1. Find DLC on vehicle    
   A plastic DLC cover may be found for some vehicles and you need to remove it before plugging the OBD2 cable.
2. Plug the connector at the end of OBD II cable to the vehicle's DLC.

Vehicle Coverage

The CReaderV is specially designed to work with all OBD II compliant vehicles,including Control Area Network(CAN).It is required by EPA that all 1996 and newer vehicles(cars and light trucks)sold in the United States must be OBD II compliant and this includes all American,Asian and European vehicles.

A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant.To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI)Label which located under the hood or by the radiator of most vehicles.If the vehicle is OBD II compliant,the label will designate"OBD II Certified".Additionally,government regulations mandate that all OBD II compliant vehicles must have a"common"sixteen-pin Data Link Connector(DLC).

For your vehicle to be OBD II compliant it must have a 16-pin DLC( Data Link Connector)under the dash and the Vehicle Emissions Control Information Label must state that the vehicle is OBD II compliant.

1 * Creader V main unit
1 * Creader V User's Manual


The packing is as follows: